CHANDLER PULL-TYPE
LITTER AND SHAVINGS SPREADERS
Superior! Economically Priced!
 |
Single Axle
or
Tandem Axle Suspension |
|
PTO Mechanical Drive
or
Hydraulic Drive
Optional GPS (variable
rate) Compatibility
|
 |
Largest choice of options of any litter spreader on the market!
More than 30 years of experience producing the heaviest built spreaders in the industry!
 |
 |
STANDARD FEATURES
|
- Construction: frame rails and floor = 3/16" thick plate; sides and ends = 10 ga. thick sheet.
- Power Source: 540 PTO with 40:1 reduction worm gear drive with 1-1/2" cross shaft.
- Conveyor: 34" wide bar type pintle chain with 3/8" thick bars on 11" centers.
- Spinners: twin 24" disc, 1/4" thick plate with four 9" blades on each disc.
- Single axle suspension - rigid mounted with 19Lx16.1 tires - 12000 lbs. rating.
- Tandem axle suspension - henschen rubber flex with 12.5Lx15 tires - 6500 lbs rating each.
- Lengths to choose from: 10 ft. through 22 ft.
|
OPTIONAL FEATURES
|
- Heavy-duty conveyor gear case: 50:1 ratio with 2" rear cross shaft.
- 2-speed conveyor gear case - unload at standard speed or shift to 1/3 of standard.
- 2-speed gear case - run spinners at standard speed or shift to 1/3 of standard.
- PTO drive - self-contained hydraulic system.
- Tandem motor case on conveyor - recommended on units 16' and up - hydraulic units.
- Stainless steel hopper construction.
- 40" wide conveyor for shavings.
- Inverted vee - to hold weight off of conveyor chain.
- Overrunning coupler on spinners to allow them to "free-wheel"
- Hydraulic end gate.
|
- Slant or slope rear end at no charge.
- Heavy-duty conveyor chain.
- Bars every other link - for lime use.
- 1/4" thick floor and rails.
- Extension brackets.
- Bolt-on spinners.
- Stainless steel floor - 10 ga.
- 52° angle on sides at no charge.
- Heat-treated spinner blades.
- Manual roll tarp system.
- Ladder.
- Tandem Henschen rubber flex axles 10000 lbs. each with 16.5Lx16.1 or 19Lx16.1 tires.
|
